*gui_w32.txt*	For MNV version 10.0.  Last change: 2026 Feb 14


		  MNV REFERENCE MANUAL	  by Bram Moolenaar


MNV's Win32 Graphical User Interface			*gui-w32* *win32-gui*

1. Starting the GUI		|gui-w32-start|
2. MNV as default editor	|mnv-default-editor|
3. Using the clipboard		|gui-clipboard|
4. Shell Commands		|gui-shell-win32|
5. Special colors		|win32-colors|
6. Windows dialogs & browsers	|gui-w32-dialogs|
7. Command line arguments	|gui-w32-cmdargs|
8. Various			|gui-w32-various|

Other relevant documentation:
|gui.txt|	For generic items of the GUI.
|os_win32.txt|	For Win32 specific items.


==============================================================================
1. Starting the GUI					*gui-w32-start*

The Win32 GUI version of MNV will always start the GUI, no matter how you
start it or what it's called.

The GUI will always run in the Windows subsystem.  Mostly shells automatically
return with a command prompt after starting gmnv.  If not, you should use the
"start" command: >
	start gmnv [options] file ..
<							*E988*
The console version with the |-g| option may also start the GUI by executing
gmnv.exe: >
	mnv -g [options] file ..
To make this work, gmnv.exe must exist in the same directory as the mnv.exe,
and this feature must be enabled at compile time.

One may also use `:gui` from the console version.  However, this is an
experimental feature and this feature must be enabled at compile time.
It uses a session file to recreate the current state of the console MNV in the
GUI MNV.

Note: All fonts (bold, italic) must be of the same size!!!  If you don't do
this, text will disappear or mess up the display.  MNV does not check the font
sizes.  It's the size in screen pixels that must be the same.  Note that some
fonts that have the same point size don't have the same pixel size!
Additionally, the positioning of the fonts must be the same (ascent and
descent).

The Win32 GUI has an extra menu item:  "Edit/Select Font".  It brings up the
standard Windows font selector.

Setting the menu height doesn't work for the Win32 GUI.

							*gui-win32-maximized*
If you want MNV to start with a maximized window, add this command to your
mnvrc or gmnvrc file: >
	au GUIEnter * simalt ~x
<

Using MNV as a plugin					*gui-w32-windowid*

When gmnv starts up normally, it creates its own top level window.  If you
pass MNV the command-line option |--windowid| with a decimal or hexadecimal
value, MNV will create a window that is a child of the window with the given
ID.  This enables MNV to act as a plugin in another application.  This really
is a programmer's interface, and is of no use without a supporting application
to spawn MNV correctly.

==============================================================================
2. MNV as default editor				*mnv-default-editor*

To set MNV as the default editor for a file type:
1. Start a Windows Explorer
2. Choose View/Options -> File Types
3. Select the path to gmnv for every file type that you want to use it for.
   (you can also use three spaces in the file type field, for files without an
   extension).
   In the "open" action, use: >
	gmnv "%1"
<  The quotes are required for using file names with embedded spaces.
   You can also use this: >
	gmnv "%L"
<  This should avoid short (8.3 character) file names in some situations.  But
   I'm not sure if this works everywhere.

When you open a file in MNV by double clicking it, MNV changes to that
file's directory.

If you want MNV to start full-screen, use this for the Open action: >
	gmnv -c "simalt ~x" "%1"

Another method, which also works when you put MNV in another directory (e.g.,
when you have got a new version):
1. select a file you want to use MNV with
2. <Shift-F10>
3. select "Open With..." menu entry
4. click "Other..."
5. browse to the (new) location of MNV and click "Open"
6. make "Always Use this program..." checked
7. <OK>

						*send-to-menu* *sendto*
You can also install MNV in the "Send To" menu:
1. Start a Windows Explorer
2. Navigate to your sendto directory:
   C:\Users\%user%\AppData\Roaming\Microsoft\Windows\SendTo .
3. Right-click in the file pane and select New->Shortcut
4. Follow the shortcut wizard, using the full path to MNV/GMNV.

When you 'send a file to MNV', MNV changes to that file's directory.  Note,
however, that any long directory names will appear in their short (MS-DOS)
form on some Windows versions.  This is a limitation of the Windows "Send To"
mechanism.

						*notepad*
You could replace notepad.exe with gmnv.exe, but that has a few side effects.
Some programs rely on notepad arguments, which are not recognized by MNV.  For
example "notepad -p" is used by some applications to print a file.  It's
better to leave notepad where it is and use another way to start MNV.

						*win32-popup-menu*
A more drastic approach is to install an "Edit with MNV" entry in the popup
menu for the right mouse button.  With this you can edit any file with MNV.

This can co-exist with the file associations mentioned above.  The difference
is that the file associations will make starting MNV the default action.  With
the "Edit with MNV" menu entry you can keep the existing file association for
double clicking on the file, and edit the file with MNV when you want.  For
example, you can associate "*.mak" with your make program.  You can execute
the makefile by double clicking it and use the "Edit with MNV" entry to edit
the makefile.

You can select any files and right-click to see a menu option called "Edit
with gmnv".  Choosing this menu option will invoke gmnv with the file you have
selected.  If you select multiple files, you will find two gmnv-related menu
options:
"Edit with multiple gmnvs"  -- one gmnv for each file in the selection
"Edit with single gmnv"     -- one gmnv for all the files in the selection
And if there already is a gmnv running:
"Edit with existing gmnv"   -- edit the file with the running gmnv

The "edit with existing MNV" entries can be disabled by adding an entry in the
registry under HKLM\Software\MNV\Gmnv, named DisableEditWithExisting, and with
any value.
						*install-registry*
You can add the "Edit with MNV" menu entry in an easy way by using the
"install.exe" program.  It will add several registry entries for you.

You can also do this by hand.  This is complicated!  Use the install.exe if
you can.

1. Start the registry editor with "regedit".
2. Add these keys:
   key		value name		    value ~
   HKEY_CLASSES_ROOT\CLSID\{51EEE242-AD87-11d3-9C1E-0090278BBD99}
		{default}		    MNV Shell Extension
   HKEY_CLASSES_ROOT\CLSID\{51EEE242-AD87-11d3-9C1E-0090278BBD99}\InProcServer32
		{default}		    {path}\gmnvext.dll
		ThreadingModel		    Apartment
   HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\gmnv
		{default}		    {51EEE242-AD87-11d3-9C1E-0090278BBD99}
   HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Shell Extensions\Approved
		{51EEE242-AD87-11d3-9C1E-0090278BBD99}
					    MNV Shell Extension
   HKEY_LOCAL_MACHINE\Software\MNV\Gmnv
		path			    {path}\gmnv.exe
   HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\mnv 8.2
		DisplayName		    MNV 8.2: Edit with MNV popup menu entry
		UninstallString		    {path}\uninstall.exe

   Replace {path} with the path that leads to the executable.
   Don't type {default}, this is the value for the key itself.

To remove "Edit with MNV" from the popup menu, just remove the registry
entries mentioned above.  The "uninstall.exe" program can do this for you.
You can also use the entry in the Windows standard "Add/Remove Programs" list.

If you notice that this entry overrules other file type associations, set
those associations again by hand (using Windows Explorer, see above).  This
only seems to happen on some Windows NT versions (Windows bug?).  Procedure:
1. Find the name of the file type.  This can be done by starting the registry
   editor, and searching for the extension in \\HKEY_CLASSES_ROOT
2. In a Windows Explorer, use View/Options/File Types.  Search for the file
   type in the list and click "Edit".  In the actions list, you can select on
   to be used as the default (normally the "open" action) and click on the
   "Set Default" button.


MNV in the "Open With..." context menu			*win32-open-with-menu*

If you use the MNV install program you have the choice to add MNV to the "Open
With..." menu.  This means you can use MNV to edit many files.  Not every file
(for unclear reasons...), thus the "Edit with MNV" menu entry is still useful.

One reason to add this is to be able to edit HTML files directly from Internet
Explorer.  To enable this use the "Tools" menu, "Internet Options..." entry.
In the dialog select the "Programs" tab and select MNV in the "HTML editor"
choice.  If it's not there then installing didn't work properly.

Doing this manually can be done with this script:

----------------------------------------------------------
REGEDIT4

[HKEY_CLASSES_ROOT\Applications\gmnv.exe]

[HKEY_CLASSES_ROOT\Applications\gmnv.exe\shell]

[HKEY_CLASSES_ROOT\Applications\gmnv.exe\shell\edit]

[HKEY_CLASSES_ROOT\Applications\gmnv.exe\shell\edit\command]
@="c:\\mnv\\mnv82\\gmnv.exe \"%1\""

[HKEY_CLASSES_ROOT\.htm\OpenWithList\gmnv.exe]

[HKEY_CLASSES_ROOT\*\OpenWithList\gmnv.exe]

----------------------------------------------------------

Change the "c:\\mnv\\mnv82" bit to where gmnv.exe is actually located.

To uninstall this run the MNV uninstall program or manually delete the
registry entries with "regedit".

==============================================================================
3. Using the clipboard					*gui-clipboard*

Windows has a clipboard, where you can copy text to, and paste text from.  MNV
supports this in several ways.  For other systems see |gui-selections|.

The "* register reflects the contents of the clipboard.  |quotestar|

When the "unnamed" string is included in the 'clipboard' option, the unnamed
register is the same.  Thus you can yank to and paste from the clipboard
without prepending "* to commands.  If this doesn't work use the "unnamedplus"
string in the 'clipboard' option.

The 'a' flag in 'guioptions' is not included by default.  This means that text
is only put on the clipboard when an operation is performed on it.  Just
Visually selecting text doesn't put it on the clipboard.  When the 'a' flag is
included, the text is copied to the clipboard even when it is not operated
upon.

							*mswin.mnv*
To use the standard MS-Windows way of CTRL-X, CTRL-C and CTRL-V, use the
$MNVRUNTIME/mswin.mnv script.  You could add this line to your _mnvrc file: >
	source $MNVRUNTIME/mswin.mnv

Since CTRL-C is used to copy the text to the clipboard, it can't be used to
cancel an operation.  Use CTRL-Break for that.

CTRL-Z is used for undo.  This means you can't suspend MNV with this key, use
|:suspend| instead (if it's supported at all).

						*CTRL-V-alternative* *CTRL-Q*
Since CTRL-V is used to paste, you can't use it to start a blockwise Visual
selection.  You can use CTRL-Q instead.  You can also use CTRL-Q in Insert
mode and Command-line mode to get the old meaning of CTRL-V.  But CTRL-Q
doesn't work for terminals when it's used for control flow.

NOTE: The clipboard support still has a number of bugs.  See |todo|.

==============================================================================
4. Shell Commands					*gui-shell-win32*

MNV uses another window for external commands, to make it possible to run any
command.  The external command gets its own environment for running, just like
it was started from a DOS prompt.

							*win32-mnvrun*
Executing an external command is done indirectly by the "mnvrun" command.  The
"mnvrun.exe" must be in the path for this to work.  Or it must be in the same
directory as the MNV executable.  If "mnvrun" cannot be found, the command is
executed directly, but then the DOS window closes immediately after the
external command has finished.
WARNING: If you close this window with the "X" button, and confirm the
question if you really want to kill the application, MNV may be killed too!
(This does not apply to commands run asynchronously with ":!start".)

The window in which the commands are executed will be the default you have set
up for "Console" in Control Panel.

							*win32-!start*
Normally, MNV waits for a command to complete before continuing (this makes
sense for most shell commands which produce output for MNV to use).  If you
want MNV to start a program and return immediately, you can use the following
syntax: >
	:!start [/min] {command}
The optional "/min" causes the window to be minimized.

==============================================================================
5. Special colors					*win32-colors*

On Win32, the normal DOS colors can be used.  See |dos-colors|.

Additionally the system configured colors can also be used.  These are known
by the names Sys_XXX, where XXX is the appropriate system color name, from the
following list (see the Win32 documentation for full descriptions).  Case is
ignored.

Sys_3DDKShadow		Sys_3DFace			Sys_BTNFace
Sys_3DHilight		Sys_3DHighlight			Sys_BTNHilight
Sys_BTNHighlight	Sys_3DLight			Sys_3DShadow
Sys_BTNShadow		Sys_ActiveBorder		Sys_ActiveCaption
Sys_AppWorkspace	Sys_Background			Sys_Desktop
Sys_BTNText		Sys_CaptionText			Sys_GrayText
Sys_Highlight		Sys_HighlightText		Sys_InactiveBorder
Sys_InactiveCaption	Sys_InactiveCaptionText		Sys_InfoBK
Sys_InfoText		Sys_Menu			Sys_MenuText
Sys_ScrollBar		Sys_Window			Sys_WindowFrame
Sys_WindowText

Probably the most useful values are
	Sys_Window	    Normal window background
	Sys_WindowText      Normal window text
	Sys_Highlight       Highlighted background
	Sys_HighlightText   Highlighted text

These extra colors are also available:
Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,

								*rgb.txt*
Additionally, colors defined by a default color list can be used.  For more
info see |:colorscheme|.  These colors used to be defined in
$MNVRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
$MNVRUNTIME/colors/lists/default.mnv.

==============================================================================
						*gui-w32-dialogs* *dialog*
6. Windows dialogs & browsers

The Win32 GUI can use familiar Windows components for some operations, as well
as the traditional interface shared with the console version.


6.1 Dialogs

The dialogs displayed by the "confirm" family (i.e. the 'confirm' option,
|:confirm| command and |confirm()| function) are GUI-based rather than the
console-based ones used by other versions.  The 'c' flag in 'guioptions'
changes this.


6.2 File Browsers

When prepending ":browse" before file editing commands, a file requester is
used to allow you to select an existing file.  See |:browse|.


6.3 Tearoff Menus

The Win32 GUI emulates Motif's tear-off menus.  At the top of each menu you
will see a small graphic "rip here" sign.  Selecting it will cause a floating
window to be created with the same menu entries on it.  The floating menu can
then be accessed just as if it was the original (including sub-menus), but
without having to go to the menu bar each time.
This is most useful if you find yourself using a command buried in a sub-menu
over and over again.
The tearoff menus can be positioned where you like, and always stay just above
the Main MNV window.  You can get rid of them by closing them as usual; they
also of course close when you exit MNV.

							*:tearoff* *:te*
:te[aroff] {name}	Tear-off the menu {name}.  The menu named must have at
			least one subentry, but need not appear on the
			menu-bar (see |win32-hidden-menus|).

Example: >
	:tearoff File
will make the "File" menu (if there is one) appear as a tearoff menu. >

	:amenu ]Toolbar.Make	:make<CR>
	:tearoff ]Toolbar
This creates a floating menu that doesn't exist on the main menu-bar.

Note that a menu that starts with ']' will not be displayed.

==============================================================================
7. Command line arguments				*gui-w32-cmdargs*

Command line arguments behave the same way as with the console application,
see |win32-cmdargs|.

==============================================================================
8. Various						*gui-w32-various*

							*gui-w32-printing*
The "File/Print" menu prints the text with syntax highlighting, see
|:hardcopy|.  If you just want to print the raw text and have a default
printer installed this should also work: >
	:w >>prn

MNV supports a number of standard MS-Windows features.  Some of these are
detailed elsewhere: see 'mouse', |win32-hidden-menus|.

							*drag-n-drop-win32*
You can drag and drop one or more files into the MNV window, where they will
be opened as normal.  See |drag-n-drop|.

							*:simalt* *:sim*
:sim[alt] {key}		simulate pressing {key} while holding Alt pressed.
			{only for Win32 versions}
			Note: ":si" means ":s" with the "i" flag.

Normally, MNV takes control of all Alt-<Key> combinations, to increase the
number of possible mappings.  This clashes with the standard use of Alt as the
key for accessing menus.
The quick way of getting standard behavior is to set the 'winaltkeys' option
to "yes".  This however prevents you from mapping Alt keys at all.
Another way is to set 'winaltkeys' to "menu".  Menu shortcut keys are then
handled by windows, other ALT keys can be mapped.  This doesn't allow a
dependency on the current state though.
To get round this, the :simalt command allows MNV (when 'winaltkeys' is not
"yes") to fake a Windows-style Alt keypress.  You can use this to map Alt key
combinations (or anything else for that matter) to produce standard Windows
actions.  Here are some examples: >

	:map <M-f> :simalt f<CR>
This makes Alt-F pop down the 'File' menu (with the stock Menu.mnv) by
simulating the keystrokes Alt, F. >
	:map <M-Space> :simalt ~<CR>
This maps Alt-Space to pop down the system menu for the MNV window.  Note that
~ is used by simalt to represent the <Space> character. >
	:map <C-n> :simalt ~n<CR>
Maps Control-N to produce the keys Alt-Space followed by N.  This minimizes
the MNV window via the system menu.

Note that the key changes depending on the language you are using.

						*intellimouse-wheel-problems*
When using the Intellimouse mouse wheel causes MNV to stop accepting input, go
to:
	ControlPanel - Mouse - Wheel - UniversalScrolling - Exceptions

And add gmnv to the list of applications.  This problem only appears to happen
with the Intellimouse driver 2.2 and when "Universal Scrolling" is turned on.


XPM support						*w32-xpm-support*

GMNV can be built on MS-Windows with support for XPM files.  |+xpm_w32|
See the Make_mvc.mak file for instructions, search for XPM.

To try out if XPM support works do this: >
	:help
	:let runtime = escape($MNVRUNTIME, ' \')
	:exe 'sign define mnvxpm icon=' .. runtime .. '\\mnv16x16.xpm'
	:exe 'sign place 1 line=1 name=mnvxpm file=' .. expand('%:p')
<
You may need to get the mnv16x16.xpm file from github:
https://github.com/Project-Tick/Project-Tick/blob/master/runtime/mnv16x16.xpm


Keycode translation strategy    *w32-experimental-keycode-trans-strategy*

In Patch v8.2.4807 W32 GMNV was changed over to experimental keycode
translation method with the aim to be able to use more keyboard shortcuts and
especially supporting non-standard keyboard layouts.  In order to implement
this support Win API TranslateMessage() call was dropped, and instead the
recognition of keycode was changed over to ToUnicode() Win API call.  This
approach uncovered numerous corner cases, which are apparently covered by
TranslateMessage() implementation, each of it is necessary to be dealt with on
an individual basis.  Therefore the decision was taken to declare this
functionality experimental for the time being and to recover "classic" keycode
translation method as default again.

Discussion about use of "experimental" keycode translation method will
probably last some time yet.  In the meantime, if you are impacted by this
change over back to "classic" keycode translation method in W32 GMNV, you can
enable "experimental" translation method again in your mnvrc using following
snippet:
>
  :call test_mswin_event('set_keycode_trans_strategy', {'strategy': 'experimental'})
<
Similarly, in case you need to turn back "classic" keycode translation method
(for example for testing purposes), please use:
>
  :call test_mswin_event('set_keycode_trans_strategy', {'strategy': 'classic'})
<
Alternatively (this method is especially useful for the TINY GMNV build, where
test_mswin_event() cannot be called), an environment variable
MNV_KEYCODE_TRANS_STRATEGY can be set to the desired value ("experimental" or
"classic"), to override the default, e.g., type in dos prompt:
>
        set MNV_KEYCODE_TRANS_STRATEGY=experimental
        gmnv.exe
<

Title Bar						*gui-w32-title-bar*

Starting with Windows 11, you can customize the gMNV title bar (also known as
the caption bar) by enabling the |'go-C'| option.

Once enabled, the appearance is controlled by two highlighting groups:
1. |hl-TitleBar|   -- Sets the color of the title bar for the active window.
2. |hl-TitleBarNC| -- Sets the color of the title bar for inactive windows.

To use the system's default title bar colors, set highlighting groups to
`NONE`: >

	hi TitleBar guibg=NONE guifg=NONE
	hi TitleBarNC guibg=NONE guifg=NONE
<

Full Screen						*gui-w32-fullscreen*

To enable fullscreen mode in the Windows GUI version of MNV, add the 's' flag
to the 'guioptions' setting.

For convenience, you can define a command or mapping to toggle fullscreen
mode:
>
	command ToggleFullscreen {
	  if &guioptions =~# 's'
	    set guioptions-=s
	  else
	    set guioptions+=s
	  endif
	}

	map <expr> <F11> &go =~# 's' ? ":se go-=s<CR>" : ":se go+=s<CR>"

The fullscreen mode will occupy the entire screen area while hiding window
decorations such as the title bar and borders.

 mnv:tw=78:sw=4:ts=8:noet:ft=help:norl: